NEMA smart street light IoT module

Module with NEMA socket - sometimes also called the US version. The module enables regulation of lighting intensity in the range of 0 - 100%, luminaire diagnostics and in case of communication failure autonomous operation based on ambient lighting sensor.

*Na dotaz také verze s komunikací formou meshování

  • LoRaWAN 1.0.3 with OTAA
  • Firmware update over the air (FUOTA)
  • DALI communication with the support of DALI-2 protocol
  • The module itself knows whether the DALI bus is powered or not and supplies the power accordingly
  • The sensor enables autonomous regulation of the luminaire based on ambient lighting sensor
  • Multicast support
  • EU868
  • TX power 25mW/ 14dBm
  • Energy consumption <0.4W
  • Power supply 85 - 305V AC
  • Dimensions: Ø 88 x 62 mm
  • IP coverage: IP65
  • Operating temperature: -30 °C to +70 °C
  • Standard ANSI C136.41 Dimming Receptacle
  • Weight: 160g
  • ACR-SLC-100L-NEMA-DALI - NEMA SSL module
  •  
  • NEMA socket
  • NEMA module

Remote diagnostics will show you any problem with the luminaire in time - whether it is a ballast or a vandal-damaged LED module itself.

In the event of a communication failure, the modules automatically switch to backup mode, where it adjust the light intensity based on the intensity of ambient lighting.

We can only supply the HW itself, help with integration or deliver a complete turnkey solution according to the investor's requirements.

We support integrators either in the form of consultations or by providing an integration proxy interface for the simplest possible communication with the luminaire.

The so-called "Firmware update over the air" allows you to upload new firmware via LoRa communication and apply security patches.

One network, more options

The use of LoRaWAN communication ensures full interoperability between the networks of different providers or private LoRaWAN installations. Thanks to the standardized communication protocol, devices from various manufacturers and suppliers can be operated in a single installation across solutions - from smart lighting, through remote readings to air quality monitoring.

We build private LoRaWAN networks for our customers, where there are no monthly operating fees for each device and we have the entire network under our management. We can thus respond flexibly to any requirements.

Robustness of LoRaWAN installations

We have completed installations with hundreds of luminaires and we have gone through the labor pains of LoRa installations. For LoRa installations, it is very important to use all the possibilities that LoRa, ie the LoRaWAN protocol, offers. The protocol is specified by the LoRaWAN Alliance and serves to make the most efficient use of the band. Specifies the behavior of devices on this network to avoid collisions and unnecessary loss of messages.

We have implemented several mechanisms over this protocol, which help to make the overall installation more robust and to keep the number of undelivered messages to a minimum.

Central management system

The control system uses all the advantages of the lighting module. Using multicast groups, it allows you to control multiple modules at once and clearly displays any errors in the ballast, luminaire or communication on a map, including notifications. Each group of luminaires can be set up with an individual schedule and lit only as needed.

Moduly

  • Modules
  • Great for DIY integrators
  • Includinch technical support
Contact

Integration ready pack

  • Solution proposal
  • Necessary hardware
  • Commissioning and maintenance of the network, including the network server
  • Technical support
Contact

Turnkey solution

  • Solution proposal
  • Necessary hardware
  • Commissioning and maintenance of the network, including the network server
  • Central management system
  • The project documentation
Contact